Synthetic Carrier RNA (1 mg/ml or 10 mg/ml solution)

Applications

  • All molecular biology applications where concentration of RNA or DNA solutions is required, such as:
  • RNA extraction/isolation procedures
  • DNA extraction/isolation procedures
  • Clean-up and reprecipitation of RNA or DNA

Benefits

  • Animal and yeast-free aqueous solution of synthetic RNA
  • Inert coprecipitating agent helping to increase the concentration of target nucleic acids in low-concentrated solutions
  • Shows no inhibition in RT-PCR, PCR and qPCR reactions
  • Stable - can be stored and shipped at ambient temperature

€24.50*

Product sizes
1 ml of 1 mg/ml conc.
€24.50*
5 ml of 1 mg/ml conc.
€105.00*
1 ml of 10 mg/ml conc.
€230.50*
5 ml of 10 mg/ml conc.
€979.50*

↑ Collapse variants ↑

Selected Catalog #: SCR0101
Product information "Synthetic Carrier RNA (1 mg/ml or 10 mg/ml solution)"

highQu Synthetic Carrier RNA is designed to be used in all kind nucleic acid purification and precipitation procedures as a carrier and co-precipitant of nucleic acids. It is especially useful to increase the amount of RNA or DNA pellet in low concentrated solutions, in such procedures, as viral RNA extraction from human specimen samples.

In contrast to commonly used carrier RNAs such as tRNA, yeast RNA, or sonicated salmon sperm DNA, the Synthetic Carrier RNA is free from animal or yeast RNA contamination. Coprecipitated RNA and DNA can be directly used for all common downstream applications, such as PCR or RT-PCR, as well as highly sensitive qPCR.

The use of carrier RNAs for coprecipitation of nucleic acids may interfere with spectrophotometrical concentration measurements.

The presence of carrier RNAs in the RNA or DNA solution may have some influence on certain enzymatic reactions performed by such enzymes that act on all nucleic acid molecules, for example T4 Polynucleotide Kinase or Terminal DNA Transferase.

Useful tips how to use coprecipitates such as carrier RNA for purification or concentration of PCR products and other low abundance DNA molecules without the use of PCR purification kits:

  • Use an appropriate coprecipitant concentration: Too little coprecipitant may result in poor recovery of PCR fragment, while too much can lead to increased background noise when performing concentration measurements.
  • Use Synthetic Carrier RNA in DNA, PCR reaction product or RNA solutions during alcohol precipitation step.
  • To maximize the yield of nucleic acids, before adding salt (Sodium acetate) and Ethanol or Isopropanol, first add Synthetic Carrier RNA and mix it well with DNA/RNA sample or PCR product.

Use following amounts of Synthetic carrier RNA:

  • Recommended final concentration in precipitation solution is 10–20 μg/ml
  • For example, add 1 μl of 10 mg/ml Synthetic Carrier RNA into 200 μl of RNA or DNA sample which will be precipitated with 3 x volumes of ethanol.
  • Alternatively, add 5 μl of 1 mg/ml Synthetic Carrier RNA into 100 μl of RNA or DNA sample which will be precipitated with 3 x volumes of ethanol.
  • Incubate at low temperatures: After adding the coprecipitant and precipitation reagents, incubate the reaction mixture at a low temperature, usually -20°C or lower, for an adequate duration (e.g., 30 minutes to overnight).

For best purification results, and highest purity PCR purification product, wash the precipitated DNA pellet: After centrifugation and removal of the supernatant, wash the DNA pellet with ice-cold 70% ethanol to remove residual impurities and dry the pellet before resolving it in nuclease free water.

 

Related Products

ALLin™ Red Taq Mastermix
highQu ALLin™ Taq DNA Polymerase is the versatile engineered enzyme which in combination with the optimized ALLin™ buffer provides higher success rates in demanding PCR applications like amplification of complex templates, crude sample PCR and fast cycling. ALLin™ Taq DNA Polymerase has the same PCR accuracy like Taq DNA Polymerase, 4.5 x 10^4 (a number of correct nucleotides incorporated before the error occurs) and produces A-tailed products suitable for ligating into TA cloning vectors. The convenience of ALLin™ Taq DNA Polymerase is maximized by the use of 2X Red Mastermix providing the additional advantage of reduced pipetting and minimized errors. ALLin™ Red Taq Mastermix, 2X is premixed with red dye and density reagents for direct loading on the gels after the PCR. In a 2% agarose TAE gel the dye migrates with~350 bp DNA, in 1% agarose TAE gel with ~ 600 bp DNA fragments. The mastermix is even supplied with the PCR Water, and the only thing to add is the template with primers.

Variants from €109.50*
€99.50*
ORA™ qPCR Probe Mix
highQu qPCR master mixes are based on the small molecular inhibitor technology Hot Start PCR allowing to achieve highest sensitivity and specificity under both standard and fast qPCR cycling conditions. They provide excellent results on both AT and GC rich templates, in multiplexing and guaranty rapid extension with early Ct values with minimum or no optimization. Our master mixes are supplied with PCR Water to guaranty the best performance. To suit the broad instrument range the ORA™ qPCR Probe Master mixes are available in three versions – without ROX, with low or high ROX concentration.

Variants from €129.50*
€117.50*
ALLin™ RPH Polymerase
highQu ALLin™ RPH Polymerase (Robust, Proofreading, Hot-start Polymerase) is the versatile engineered enzyme combining best polymerase properties for excellence in most demanding PCR applications, like low copy detection, long or high fidelity PCR, amplification of complex templates, crude sample PCR and multiplexing. ALLin™ RPH Polymerase has 5 times higher fidelity than Taq DNA Polymerase and produces A-tailed products suitable for ligating into TA cloning vectors. For the maximum convenience the ALLin™ RPH Mastermix, 2X is available.

Variants from €219.50*
€199.50*
2X 1Step RT qPCR Probe Kit
Our improved 2X 1Step RT qPCR Probe Kits provide highly sensitive target RNA detection when working with a wide variety of samples. The optimized 1Step RT qPCR Pro Mix in combination with a blend of thermostable Reverse Transcriptase and an advanced RNase Inhibitor (RT-Pro Mix) allows for a single step, one tube RT qPCR with great results even in multiplex reactions. The novel RT-Pro Mix ensures safe and efficient RNA template conversion into a single-stranded cDNA. Pure RNA samples, as well as lysed crude samples can serve as templates for one-step RT qPCR. Though the kit was not specifically designed for crude sample qPCR, it has a potential to work well for this application. The robust 1Step RT qPCR Pro Mix is a 2X concentrated qPCR master mix which includes dNTPs, buffer, and the hot start Taq DNA Polymerase. The Hot Start function ensures the highest sensitivity and specificity under both standard and fast qPCR cycling conditions. The kits provide excellent results on both AT and GC-rich templates and show early Ct values with minimum or no optimization. Our kits include PCR Water to guaranty the best performance. To suit the broad instrument range the 2X 1Step RT qPCR Probe Kits are available in three versions – without ROX, with low or high ROX concentration.

Variants from €247.00*
€224.50*