NEW StainIN™ eco-RED Nucleic Acid Stain - a less toxic alternative to ethidium bromide

NEW StainIN™ eco-RED Nucleic Acid Stain - a less toxic alternative to ethidium bromide

Applications

  • Staining of DNA or RNA in agarose and polyacrylamide gels
  • ssDNA, dsDNA and RNA visualization under the UV light
  • ssDNA, dsDNA and RNA visualization under LED light

Benefits

  • Replaces discontinued StainIN™ RED Nucleic Acid Stain NAS0101
  • Safe, DMSO-free, economical alternative to ethidium bromide
  • Universal – in gel staining, or post- run staining, no de-staining.
  • Ambient temperature storage (protected from light)

€119.50*

Product sizes
1 ml
€119.50*

↑ Collapse variants ↑

Selected Catalog #: NAS0301
Product information "StainIN™ eco-RED Nucleic Acid Stain "
 
StainIN™ eco-RED Nucleic Acid Stain, a 10000X concentrated aqueous solution is a significantly safer alternative to ethidium bromide. It is same easy to use, twice as sensitive and much more secure. At least twice as economical as competing products, this novel DMSO-free stain can be also used and disposed with less environmental and health concerns compared to ethidium bromide. StainIN™ eco-RED is a fluorescent dye that allows detection of >0,1 ng of DNA in both agarose and polyacrylamide gels. It binds to both ds DNA, ssDNA and RNA and emits red fluorescence detectable under the LED or UV light and documented with same filters as ethidium bromide. For cloning applications, LED light is recommended. The lower than ethidium bromide carcinogenicity of the dye has been proven by Ames-test. 

 

The carcinogenicity and a high toxicity of a widely used gel stain Ethidium Bromide (EtBr) is one of the biggest safety and environmental problems in the labs where gel electrophoresis is a daily routine. Therefore, there is a need for a safer ethidium bromide alternatives to be used in laboratories. The novel less toxic nucleic acid dyes used for agarose gel electrophoresis address this ethidium bromide problem and minimize environmental concerns.

highQu StainIN™ eco-RED Nucleic Acid Stain provides a significantly safer alternative to ethidium bromide while delivering up to several times higher detection sensitivity. Same like ethidium bromide, the stain is used during the process of electrophoresis in an agarose gel or PAAG and (optionally) in the electrophoresis running buffer, or alternatively, for a post-run staining of the gels in a tray with the buffer.

Despite having a proven lower mutagenicity, all nucleic acid stains shall be handled with care, as they interact with DNA and RNA.  Used electrophoresis buffer with a stain as well as melted gels shall be run through approved (carbon) filters. If the absence of residual fluorescence is confirmed, the liquids can be disposed with plenty of water down the drain.

Alternatively, all used liquids can be autoclaved or heated as the StainIN™ eco-RED Nucleic Acid Stain degrades during the long exposure to above 100ºC temperature.

The safety office shall be consulted periodically to match local regulations, as these regulations vary and change. Despite of tests described in this report, the seller of the listed stains and other reagents does not take any responsibility for the possible damage resulting from handling any sold chemical or reagent.

 

Frequently asked questions about the new Nucleic Acids Stain

1.      What are the advantages of the new StainIN™ eco-RED NA Stain over the old version StainIN™ RED?

  • The new stain is purely aqueous solution. The old StainIN™ RED had DMSO as solvent. 
  • The new stain is room temperature stable, shipped at ambient temperature. Store it at your electrophoresis bench. The old StainIN™ RED was stored at +4°C. 
  • StainIN™ eco-RED NA Stain is more flexible – detectable under both UV and LED light.
  • More convenient protocol – the stain can be used both during the gel run and as a post-run staining.
  • Same or better sensitivity compared to the old stain.

2.      Is the color of the solution the same as before? 

The new stain is a darker shade of red.

3.      What is the concentration of the StainIN™ eco-RED Nucleic Acids Stain? 

It is 10,000X concentrated, however the number of applications for post run staining is difficult to calculate because multiple gels can be stained in the same staining solution. 

4.      What is the solvent used in the StainIN™ eco-RED Nucleic Acids Stain?

The solvent is 100% water.

5.      Which stains are similar to StainIN™ eco-RED Nucleic Acids Stain? 

The closest similar stains are Ethidium Bromide and GelRed (Biotium).

6.      What is the sensitivity of the StainIN™ eco-RED Nucleic Acids Stain in ng/band? 

The sensitivity ranges from 0.1 to 0.3 ng DNA/band or even higher, depending on factors such as the staining method used, imaging capability, detection, and gel thickness.

7.      What is the emission wavelength of the StainIN™ eco-RED Nucleic Acids Stain? 

The emission wavelength is 600 nm.

8.      What is the excitation wavelength of the StainIN™ eco-RED Nucleic Acids Stain? 

The excitation wavelength is 300 nm.

9.      Can StainIN™ eco-RED Nucleic Acids Stain be used for in-gel and in-buffer staining? 

Yes, it can be used for both in-gel and in-buffer staining post electrophoresis run.

10.   How should the stain be used during a gel run in agarose gels? 

Use 8-10 µl of the stain in 100 ml agarose gel solution cooled down for pouring, nothing to be added in to the electrophoresis buffer.

11.   How to use StainIN™ eco-RED Nucleic Acids Stain with PAAGE gels? Same like with agarose gel, or using the post-run staining protocol.

12.   Can the StainIN™ eco-RED Nucleic Acids Stain be detected under UV light? 

Yes, it can be detected under UV light, with ethidium bromide or GeRed filters.

13.   What color does the stained DNA appear as under UV light? 

DNA appears as red-orange under the UV light.

14.   What color does RNA appear as under UV light? 

RNA appears as red-orange under UV light.

15.   Does StainIN™ eco-RED Nucleic Acids Stain color both single-stranded and double-stranded DNA? 

Yes, it can stain both single-stranded and double-stranded DNA, and RNA.

16.   Can the stained DNA be detected with a blue LED? 

Yes, the StainIN™ eco-RED Nucleic Acids Stain -stained DNA can be detected with a blue LED.

17.   Is StainIN™ eco-RED Nucleic Acids Stain compatible with cloning? 

Yes, as it can be used with LED without damaging DNA.

18.   Has StainIN™ eco-RED Nucleic Acids Stain undergone toxicity testing? Yes, it is less toxic than Ethidium Bromide See the toxicity testing report.

19.   Can StainIN™ eco-RED Nucleic Acids Stain be used for post-run staining? 

Yes, it can be used for post-run staining.

20.   Can the staining buffer (electrophoresis buffer with the NA stain) be reused? 

Yes, the staining buffer can be reused several times, depending on gel thickness and the amount of DNA stained. It should be stored in the dark in a glass or plastic container. To avoid StainIN™ eco-RED Nucleic Acids Stain absorbance on plastic or glass over the prolonged storage of more than 24 hours, make a fresh staining solution every day.

21.   Is the StainIN™ eco-RED Nucleic Acids Stain sensitive to light? 

Yes, same as all other fluorescent nucleic acid’s stains, the StainIN™ eco-RED Nucleic Acids Stain is light-sensitive and should be protected from light.

22.   Can StainIN™ eco-RED Nucleic Acids Stain be stored at +4°C? 

The recommended storage conditions for this stain is ambient temperature at about +20°C. 

However, due to common cooled shipments, it can be exposed for a short time to +4°C. If accidentally shipped with cooling packs at +4°C, simply mix the product to ensure the stain is completely dissolved. And keep it further only at ambient temperature.

23.   What happens if the StainIN™ eco-RED Nucleic Acids Stain was put or exposed to -20°C and was frozen? 

If frozen, the StainIN™ eco-RED Nucleic Acids Stain should be disposed and the new product shall be ordered. Do not use it if once frozen.

Related Products

StainIN™ GREEN Nucleic Acid Stain
StainIN™ GREEN Nucleic Acid Stain is a significantly safer alternative to ethidium bromide. It is same easy to use, 4X as sensitive (under Blue LED) and much more secure. More economical as other green dyes, this stain can be also used and disposed with less environmental and health concerns compared to ethidium bromide. It is a fluorescent dye that allows detection of >0,1 ng of DNA in both agarose and polyacrylamide gels. It binds to both dsDNA, ssDNA and RNA and emits green fluorescence when bound to DNA and red fluorescence when bound to RNA detectable under the UV or Blue light and documented with same filters as similar green dyes. StainIN™ GREEN is ideal for DNA extraction from gels for cloning. Smaller than ethidium bromide carcinogenicity has been proved by Ames-test. Mammalian cell mutagenicity tests, both mouse marrow erythrocyte micronucleus and spermatocyte chromosomal aberration tests gave negative mutagenicity results. Carcinogenicity and toxicity of the widely used Ethidium Bromide (EtBr) is one of the biggest safety and environmental problems in the labs where gel electrophoresis is a daily routine. The less toxic nucleic acid dyes address this problem and minimize concerns. The StainIN™ GREEN (SYBR Green-like stains alternative), (SYBR® Green is a registered trade mark of Molecular Probes Inc.) and StainIN™ eco-RED Nucleic Acid Stains by highQu provide a much less-carcinogenic, significantly safer alternative to EtBr while delivering even several times higher detection sensitivity. Same like EtBr, these stains are used during the process of electrophoresis in an agarose gel or PAAG and in the electrophoresis running buffer. Nucleic acid stains are typically divided into two groups – they are either intercalating dyes or minor groove binders. The StainIN™ GREEN and StainIN™ eco-RED Nucleic Acid Stains belong to the group of intercalating dyes that bind to NA and produce the fluorescence signal. Same like many other suppliers of similar products, highQu retains the right to keep the precise chemical information undisclosed and proprietary. The StainIN™ GREEN Nucleic Acid Stain as well as the StainIN™ eco-RED Nucleic Acid Stain are both supplied in water. Detailed safety information is available in MSDS sheets of the stains. Despite proven less mutagenicity, all nucleic acid stains, including SYBR® Green or other shall be handled with care. Used electrophoresis buffer with a stain as well as melted gels shall be run through approved (carbon) filters. If the absence of residual fluorescence is confirmed, the liquids can be disposed with plenty of water down the drain. Alternatively, all used liquids can be autoclaved as the StainIN™ GREEN and StainIN™ eco-RED Nucleic Acid Stains degrade during the long exposure to above 100ºC temperature. The safety office shall be consulted periodically to match local regulations, as they vary and change.    

Variants from €108.00*
€98.00*
ALLin™ Red Taq Mastermix
highQu ALLin™ Taq DNA Polymerase is the versatile engineered enzyme which in combination with the optimized ALLin™ buffer provides higher success rates in demanding PCR applications like amplification of complex templates, crude sample PCR and fast cycling. ALLin™ Taq DNA Polymerase has the same PCR accuracy like Taq DNA Polymerase, 4.5 x 10^4 (a number of correct nucleotides incorporated before the error occurs) and produces A-tailed products suitable for ligating into TA cloning vectors. The convenience of ALLin™ Taq DNA Polymerase is maximized by the use of 2X Red Mastermix providing the additional advantage of reduced pipetting and minimized errors. ALLin™ Red Taq Mastermix, 2X is premixed with red dye and density reagents for direct loading on the gels after the PCR. In a 2% agarose TAE gel the dye migrates with~350 bp DNA, in 1% agarose TAE gel with ~ 600 bp DNA fragments. The mastermix is even supplied with the PCR Water, and the only thing to add is the template with primers.

Variants from €109.50*
€99.50*
CozyXL™ Prestained Protein Ladder
highQu ready to use Prestained Protein Ladders are mixtures of highly recombinant proteins with coupled chromophores providing sharp protein bands and bright colors on denaturing polyacrylamide gels. The high ladder purity allows for exceptional stability and room short term temperature storage. Ladders are ready to be directly loaded on gels without any preparation or heating. They provide sharp bands for approximate protein sizing and allow for monitoring of electrophoresis process and Western transfer efficiency.

Variants from €274.50*
€249.50*
25 mM dNTP Mix
highQu dNTP sets and mixes meet all highest industry standards and allow for unrivaled performance of your PCR and other DNA synthesis, labeling or sequencing reactions. Produced under the stringent quality monitoring conditions, they guaranty reproducible results. More than 99% HPLC purity eliminates inhibitions of PCR and allows for increased yields with higher dNTP concentrations. Exceptional stability of dNTPs allows for short term ambient temperature shipments, short term room temperature storage or long PCR of more than 30 kb targets, as well as long amplifications exceeding 40 cycles.

Variants from €219.50*
€199.50*